Parts for Briggs & Stratton 135202-1127-E1: Air Cleaner Groups Parts

This air cleaner gasket is a genuine replacement that is designed for select models of 3-5 HP small engines from Briggs & Stratton. The air cleaner gasket is designed to fit between the air cleaner and the carburetor assembly. This helps to create a seal between the two components and ensure that air does not leak out of the engine to provide the appropriate pressure. Gaskets are exposed to a lot of heat and pressure, along with constant vibrations, which can cause them to become frail or brittle over time. Replacing them is usually considered a part of routine maintenance and OEM parts should always be used. This genuine OEM air cleaner gasket is manufactured to exact standards and can be used on select engines from Briggs & Stratton and Toro. The engines are typically found on equipment like blowers, lawn mowers, generators, and other small lawn and garden machines. This gasket is sold as a single unit and does not include additional components or hardware. To replace the gasket, be sure to have the appropriate tools and a cool engine for best results. Never perform work when the engine is hot and always wear gloves to protect the hands.

This air cleaner gasket is made of durable composite material. The main purpose of the gasket is to create an airtight seal for the air cleaner assembly. However, as time goes on, the material can start to wear out and deteriorate and will need to be replaced to ensure the best performance from the outdoor power tool. If the air cleaner gasket is cracked or worn out, replacing it starts with moving the equipment to a stable surface and disconnecting the spark plug wire. Use a screwdriver to remove the top of the air cleaner cover, the filter, and then the bottom half of the cover. Pry out the old air cleaner gasket before installing the new part. Reattach the bottom of the cover, replace the filter, and screw down the top half of the cleaner.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The air cleaner gasket is made for use with lawnmowers, tillers, pressure washers, generators, and wood chippers manufactured by Simplicity, Toro, Craftsman, and Briggs & Stratton.

This filter air-cleaner cartridge is a genuine Midwest Engine part that can be used as a replacement part for outdoor appliances with small engines, such as leaf blowers, vacuums, and generators. The function of a filter air-cleaner cartridge is to protect the appliance from accumulating dirt, debris, and gunk which could damage the appliance's day-to-day functionality. This OEM replacement filter air-cleaner cartridge can serve as a 1:1 exchange for a malfunctioning or damaged filter air-cleaner cartridge. Signs of damage in a filter air-cleaner cartridge can manifest in the form of lower fuel economy than usual, strange popping and hissing engine noises, a visually dusty or dirty film on the filter revealed either by the naked eye or by flashlight, or black smoke pluming from the exhaust pipe. If any of these symptoms occur, the filter air-cleaner cartridge should be inspected and/or replaced. If the diagnosis proves the filter air-cleaner cartridge to be at fault, a new cartridge should be ordered before any attempt to use the appliance without a proper repair. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This spring brake is compatible with the brands Briggs and Stratton, Toro, and Simplicity.

This filter is used for lawn and garden equipment. A dirty or clogged filter could cause the engine to run poorly.

This pre-cleaner filter sifts out dirt, dust, and debris in the air so it doesn't end up in other parts of the lawn and garden equipment. The pre-cleaner filter is made of durable foam but can become damaged or dirty. If it starts to clog or has been damaged, it will need to be replaced. A visual inspection of the pre-cleaner filter will determine whether it needs a replacement.There are no tools needed to replace the pre-cleaner filter in a piece of outdoor lawn equipment. The first step is to open up the housing that holds the pre-cleaner filter. From there, the actual pre-cleaner filter can be inspected and removed if overly dirty or damaged. The new replacement pre-cleaner filter will go into the same location. This is an authentic OEM replacement component that is directly sourced from the manufacturer. It is sold on an individual basis. The pre-cleaner filter is made for use with lawnmowers, tillers, leaf blowers, edgers, and wood chippers manufactured by Briggs & Stratton, Toro, Simplicity, and Lawn-Boy.

The pre-cleaner is usually placed over the actual air filter and is designed to catch debris and emissions before they enter the air filter, which will then clean the rest of the air going through the machine. The pre-cleaner can become dirty and clogged with debris as a part of regular use. As such, it should be replaced as part of a regular maintenance routine. However, it may also need to be replaced intermittently if it becomes clogged. An air filter or pre-cleaner is clogged if the engine will not run as smoothly as it should. Always check the manual for compatibility and part numbers, as well as any safety and replacement recommendations. This unit can be installed dry and does not require any special preparation or pre-oiling. This part replacement is suggested as maintenance because you may not be able to tell it is dirty until it is removed from the air filter, but a replacement is easy to perform. This OEM replacement pre-cleaner is compatible with various models of air filters in Briggs & Stratton engines. Be sure to check your user manual for part number compatibility and always wear gloves when replacing engine components.

This replacement part is a screw. It is a genuine replacement part made by Midwest Engine. Screws are found in many different types of appliances and machines. These parts are important in holding different pieces together so that the user is able to operate the appliance effectively. A replacement screw might be needed if some parts of the appliances are loose or missing. Screws can become stripped over time. If this is the case it is recommended that they be replaced as soon as possible. The repair for this screw is simple and will most likely require a screwdriver and perhaps pliers if the previous part is lodged in place. This screw is made of durable metal. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This is a genuine OEM replacement part.