Parts for Briggs & Stratton 42A707-2238-E2: Air Cleaner, Muffler Parts

This screw is designed to be used on all sorts of lawn and garden equipment. The metal screw is durable and attaches to the muff guard bracket to keep it in place and stable while the equipment is being used. This screw can become damaged through overuse or wear and tear. It can also break or become stripped, which will require it to be replaced.Visually inspecting the area with the muff guard bracket is connected to the rest of the equipment will give information about whether the screw is broken or damaged. The screws can also be cleaned to be more visible so small problems are easier to pick up on. Sometimes the screws can become loose, which is another situation where a replacement is needed. Simply use a screwdriver to take out the old screw and replace it with a new one.This screw is a genuine OEM replacement part that is directly sourced from the manufacturer. It comes as an individual part. The screw can be used on snowblowers, lawnmowers, lawn tractors, tillers, pressure washers, leaf blowers, edgers, generators, wood chippers, and log splitters made by MasterCut, Simplicity, MTD, Snapper, Lawn-Boy, Wheel Horse, Cub Cadet, Toro, Craftsman, and Briggs & Stratton.

The air cleaner cartridge filter part is very important to the life of the machine. It stops dust and other harmful contaminants the from entering the carburetor. Unfortunately, over time air filters will wear out or become clogged. This will require a replacement air cleaner cartridge filter part in order to keep the machine running at peak performance. This air cleaner cartridge filter is also sometimes referred to as an A/C cartridge. Users are encouraged to check the owner's manual of their particular model prior to purchasing and to refer to the included diagrams to find the correct application of this component.This air cleaner cartridge filter is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is a genuine part manufactured by Midwest Engine. This part is intended for use on small engines, lawnmowers, and lawn tractors. It designed to be compatible for use with products manufactured by Briggs & Stratton, Toro, Simplicity, and Craftsman.

This screw is designed to be used on all sorts of lawn and garden equipment. The metal screw is durable and attaches to the muff guard bracket to keep it in place and stable while the equipment is being used. This screw can become damaged through overuse or wear and tear. It can also break or become stripped, which will require it to be replaced.Visually inspecting the area with the muff guard bracket is connected to the rest of the equipment will give information about whether the screw is broken or damaged. The screws can also be cleaned to be more visible so small problems are easier to pick up on. Sometimes the screws can become loose, which is another situation where a replacement is needed. Simply use a screwdriver to take out the old screw and replace it with a new one.This screw is a genuine OEM replacement part that is directly sourced from the manufacturer. It comes as an individual part. The screw can be used on snowblowers, lawnmowers, lawn tractors, tillers, pressure washers, leaf blowers, edgers, generators, wood chippers, and log splitters made by MasterCut, Simplicity, MTD, Snapper, Lawn-Boy, Wheel Horse, Cub Cadet, Toro, Craftsman, and Briggs & Stratton.

This is an exhaust gasket designed to fit between the engine exhaust and the exhaust system. It’s designed for use on lawn tractors and is the OEM part for many tractors in the Briggs & Stratton family of brands. When properly installed, it will prevent exhaust leakage. It will also flex enough to allow for parts expanding due to heat. The main symptom of a failed gasket is exhaust leaking from the joint. Gaskets can fail due to a variety of factors. They can dry out, lose flexibility, and crack. They can chafe, losing their heat resistance and drying out prematurely. They can even tear due to excessive engine vibration. In this case, it’s advisable to check your engine mounts to make sure they’re fully secure and tightened. To replace the exhaust gasket, with the engine off, remove the two screws that run through the old gasket. Remove the old gasket and insert the new gasket carefully into place. Screw the exhaust system back together to complete the repair. This is an OEM part sourced directly from the manufacturer and is sold individually.

The filter pre-cleaner is a first-stage cleaning system for the air filter in combustion engines. Typically, a pre-cleaner will be made of a dense foam material and will fit around a cartridge-style air filter, adding an extra level of filtration for any air coming into the engine. Over time, both the pre-cleaner and the filter can become clogged with regular use and typically need to be replaced as part of routine maintenance. However, intermittent clogs and damage can also occur that would necessitate an emergency replacement. Many people keep an extra set on hand in case of urgent repair needs. This genuine OEM filter pre-cleaner is specifically designed to fit select Briggs & Stratton engine air filters. It is compatible with over 150 machines from the brand, as well as select Toro machines that feature Briggs & Stratton engines. Replacing the air filter is simple but gloves should always be worn for hand protection. Allow the engine to cool completely and check the air filter if you are replacing the pre-cleaner to ensure that it doesn't need to be changed, as well.