Parts for Briggs & Stratton 31A607-0123-E1: Alternator, Controls, Ignition Parts

Magneto Armature, also known as an Ignition Coil

This is a screw that is used in many types of lawn and garden equipment, including lawnmowers and wood chippers. It comes with a black finish and is made of durable metal. The screw can be used in many locations on a tool to attach two components together. Screws can also be used in tandem with nuts, but the two components should have the same threading and finish.Screws can become damaged, break, or be stripped and will need to be replaced. Corrosion, extreme temperatures, and unexpected stress can all lead to issues with a screw. A visual inspection can indicate whether the screw should be replaced. If it does need replacement, a screwdriver can be used to remove the original screw. The new component can be placed and tightened.This screw is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as a single component. The screw can be used with many types of lawn and garden equipment, including lawnmowers, tillers, pressure washers, leaf blowers, edgers, generators, wood chippers, and snowblowers manufactured by Briggs & Stratton, Cub Cadet, Craftsman, Murray, Wheel Horse, Lawn-Boy, MTD, MasterCut, Simplicity, and Toro.

This voltage regulator is an original OEM part sourced directly from the manufacturer, Midwest Engine. It is sold individually. A voltage regulator is an important piece when it comes to regulating and stabilizing the electrical currents of a piece of machinery. It is designed for use with outdoor lawn and garden power equipment that have small engines, such as a lawn mower, a snow blower, and a wood chipper. It is compatible with products by brands such as Briggs & Stratton, Toro, Cub Cadet, Lawn Boy, and Simplicity.The voltage regulator part is crucial to the machine. Specifically, it is a 5-9 amp regulator for small engines that are commonly installed on a variety of lawn and garden equipment. It is designed to be an exact replacement for missing or damaged components on a new unit. The purpose of the voltage regulator is to regulate electrical voltage within the machine as it operates.The replacement or repair process of the voltage regulator should be straightforward, although a screwdriver and pliers may be needed to complete the replacement process. The user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

Small motors require electrical supplies, and the voltage regulator in any engine maintains the voltage from the power source at an acceptable level. It will keep voltage in a specific range that the device can tolerate. This voltage regulator is designed for use in small engines made by or used in motors for Briggs & Stratton, Toro, and Vanguard machines. It is meant for 10-16 amp voltage regulation and includes all of the wiring needed to do the job. It works well with an array of garden machine and lawn machine engines, and will regulate the electrical systems. This is an OEM replacement part that requires a screwdriver and socket set to both remove and then replace. The voltage regular ships individually.

This genuine starter solenoid transfers electrical current from the battery to the starter during the engine starting process, allowing the engine to engage. This part could become worn over time or develop electrical malfunctions, which could eventually lead to a need for a full replacement. In the event that the solenoid goes bad, it could result in poor engine performance or not permit the engine to start at all. This replacement part could provide an exact fit for compatible lawn and garden units. This genuine OEM solenoid from Briggs & Stratton is manufactured to exact specifications. It is compatible with engines used in select models of generators and other lawn and garden equipment made by the brand. This genuine OEM part is sold individually and does not include any hardware or additional components. It is imperative to disengage the spark plug and allow the engine to cool before performing engine repairs like replacing the starter solenoid. A wrench or socket set will be required to disconnect the old solenoid and install the new unit and gloves should be worn for hand protection.

This brush retainer is part of the starter motor on many types of lawn and garden machinery. It comes with both the retainer and a set of four brushes. The main job of the brush retainer is to hold a set of carbon brushes against the commutator bars located on the armature. If the brush retainer is worn, damaged, or improperly seated, it can cause problems with the equipment. The starter motor will not be able to get the proper amount of current from the battery.If the brush retainer might be causing problems, a visual inspection can be performed. A damaged brush retainer can wear down to the wire lead and become burned, pitted, or cracked. When the brush retainer is worn out, it can decrease engine performance, reduce braking, and cause the motor to lose power. This brush retainer is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual part. The retainer is made to be used with lawnmowers, snowblowers, tillers, and wood chippers created by Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.