Parts for Briggs & Stratton 19E412-1101-E1: Alternators, Engine / Valve Gasket Sets Parts

This oil seal is a genuine OEM replacement part designed for use on a wide variety of small gas-powered appliance engines. Although small, an oil seal is an important part of the oil cylinder assembly as it prevents oil from leaking into other parts of the engine. If oil begins to leak into the engine, it can corrode other parts or even pose a fire hazard. Therefore, it's important that the oil cylinder is tightly sealed to prevent any damage to the engine. Seals can wear out over time, especially if exposed to heat. Heat will cause the seal to shrink, effectively unsealing the oil cylinder. Before making this repair, be sure to drain the oil cylinder of any oil and be prepared for an involved replacement process. This part is compatible with Toro, Murray, and Briggs & Stratton appliances and is sourced from the original manufacturer. It ship individually of other hardware.

On lawn and garden equipment, the cylinder head gasket sits between the engine block and the cylinder head. It works by sealing in the internal combustion process and prevents coolant and oil from mixing while moving from the engine block to the cylinder head. If the cylinder head gasket is malfunctioning, it can result in white smoke, fouled spark plugs, leaking coolant, milky white oil, and engine overheating.Over time, gaskets can start to wear out and may crack, resulting in the need for a replacement. Tools required to replace the cylinder head gasket include a socket driver, nut driver, hex bit, spark plug wrench, screwdriver, torque wrench, Torx screwdriver, and a gauge. First, gain access to the cylinder head gasket and check whether it is flat. Prepare a flat surface before removing the old head gasket and putting in the new one.This cylinder head gasket is a genuine OEM replacement part directly sourced from the manufacturer. It is made to fit lawnmowers, wood chippers, snowblowers, tillers, and generators from Briggs & Stratton, Simplicity, Toro, and Lawn-Boy.

This genuine OEM breather gasket creates a tight seal in the breather, allowing the exhaust gases to flow and escape properly and regulating the pressure in lawn and garden machine engines. It also helps distribute the pressure evenly over the breather and the valves. Over time, this part can become brittle like all gaskets, as it is exposed to constant pressure and high heat. This can cause it to crack, break, or even create a leaky seal. In any case, a full replacement will be necessary and this genuine OEM replacement gasket can provide the solution. One gasket is included and all other parts and hardware are sold separately. Always allow the engine to cool before replacing gaskets or performing other repairs. Use the correct tools for replacement to ensure that the gasket is not damaged in the process. This breather gasket is manufactured to exact standards by Briggs & Stratton. It has applications on more than 100 compatible machines made by this brand, Toro, and Murray, including lawn tractors and generators. This part is a composite piece that is made of premium materials and sold individually.

This crankcase gasket is a genuine Midwest Engine part, sold individually. This crankcase gasket can be used as a replacement part in snowblowers, lawn mowers, and lawn tractors. The function of the crankcase gasket in these tools is to seal off the crankcase so that oil cannot leak out of it and dirt and debris cannot accumulate inside of it. A broken, malfunctioning, or loosened crankcase gasket can result in the accumulation of dirt, debris, and pebbles inside the crankcase and the crankshaft of outdoor appliances, which can cause damage to the engine; additionally, oil leakages can occur if the crankcase gasket is loose or damaged. If either of these symptoms is the case, this genuine OEM replacement part should be ordered immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This crankcase gasket is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, Simplicity, Cub Cadet, and Lawn Boy.

This replacement part is a gasket. This is a genuine replacement part made by Midwest Engine. This part works with the engine in different types of machines or appliances to ensure that a seal can fill the space between two different parts. A new gasket might be needed if the current one is missing or damaged. This can be from an isolated incident or from normal wear and tear over time. If the gasket is causing certain gasses or parts to leak or become loose, be sure to replace this part immediately. Work gloves are also recommended when working near or around the engine. Refer to the owner's manual for more information on how to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This oil seal is a genuine OEM replacement part designed for use on a wide variety of small gas-powered appliance engines. Although small, an oil seal is an important part of the oil cylinder assembly as it prevents oil from leaking into other parts of the engine. If oil begins to leak into the engine, it can corrode other parts or even pose a fire hazard. Therefore, it's important that the oil cylinder is tightly sealed to prevent any damage to the engine. Seals can wear out over time, especially if exposed to heat. Heat will cause the seal to shrink, effectively unsealing the oil cylinder. Before making this repair, be sure to drain the oil cylinder of any oil and be prepared for an involved replacement process. This part is compatible with Toro, Murray, and Briggs & Stratton appliances and is sourced from the original manufacturer. It ship individually of other hardware.

This air cleaner gasket is a genuine Midwest Engine replacement part for appliances that use small engines, such as wood-chippers, snowblowers, leaf blowers, and lawn mowers. The function of an air cleaner gasket is to seal off and protect the engine from the accumulation of dirt, debris, and gunk in the infrastructure.The air cleaner gasket could be subject to damage from overuse or general wear and tear. If the air cleaner gasket is not sealing, thereby preventing the primer bulb from operating as usual and failing to protect the engine from outside dirt and debris, the part should be replaced immediately. The appliance at hand should not be used until the air cleaner gasket has been replaced. Before purchasing a replacement air cleaner gasket, determine whether or not the problem in question is attributable directly to the air cleaner gasket or if the engine is malfunctioning for another reason.This air cleaner gasket is compatible with the following brands: Briggs and Stratton, Simplicity, and Cub Cadet. This part sold individually.

This replacement exhaust gasket is an authentic OEM part for a snowblower or lawn tractor engine. On these appliances, the exhaust is located quite near to the air filter, meaning that there is a chance that exhaust could leak into the carburetor. The carburetor requires fresh air to oxygenate fuel for combustion, so manufacturers install a gasket to help seal off the exhaust. Once installed, gaskets exist under a lot of pressure and will absorb the heat of the engine. These stresses cause gaskets to slowly degrade and eventually break their seal. If the exhaust gasket blows, the engine will not perform as it should. Be cautious of a noisy engine that burns more fuel than usual and gives off a burning smell. These are signs that the exhaust gasket has given out. If so, use a socket wrench and wrench set to disassemble the blower and air filter housings, then remove the exhaust manifold and change out the broken gasket. This high-quality replacement exhaust gasket is compatible with engines made by Toro, Husqvarna, Briggs & Stratton, and Snapper. It comes sourced from the original manufacturer and ships individually.

No part of an engine is more elemental than the off/on switch. Briggs & Stratton manufacture this switch as a replacement part for more than 150 of their gasoline-powered motors, in particular on their gasoline-powered generators. As equipment that is intended to produce and maintain a great deal of power over several hours at a time, the internal connections of the generator can experience a lot of resistance, which means creating a lot of heat. The rotary off/on switch is a locus of much of that heat since it is the quick, safe way to stop the generator. As a result, the switch can be damaged by heat. Typically, the switch will reveal that it needs to be replaced by failing to remain in the on position. Replacing the rotary switch is a simple matter. Remove the plug cap and stabilize the generator so it cannot move during the procedure. Remove in order the starter rope, air filter assembly, electrical connection from cover, and four cover bolts. The old switch can be pinched out after disconnecting the ground wire. Reverse the order to install this new, OEM guaranteed replacement rotary off/on switch.