Hugh King for Model Number she6805uc/28 E 25 code and E 24 code I Checked all drain hoses and they are clear I checked inlet to train impeller all clear.. I replace drain pump no help. You can hear drain pump pulse for about 2 seconds and water comes out of drain hose. It does this about three times until it sets E25.. If you drain it by using reset button after a cycle starts and do this 3-4 times until water gets low enough then drain pump stays on and finishes normally. any ideas?
Answer Hugh, You may want to try starting the dishwasher, disconnect the drain hose from the plumbing under the sink. Allow the dishwasher to run a minute or two, then drain the water into a large bucket or trash can. This should clear any restrictions in the drain hose / line. Then check the wiring and connections to the drain pump, then replace the drain pump 00611332 . This is a low voltage DCV motor and can operate erratically and intermittently. Read More... Answered by AppliancePartsPros.com | Wednesday, April 11, 2018