Customer Questions and Answers for Door Hinge by Bosch

Michael, Here's some information : "REMOVING THE OVEN DOOR CAUTION: Be careful handling the oven door when removing it, as it is very heavy. Never lift the door by the handle. 1. Pull the oven out of its mounting location so that you can access the left and right hinge pocket covers. 2. Remove the screws from the left and right hinge pocket covers and remove the covers. 3. Remove the locking screw from each of the hinges.4. Fully open the oven door5. Raise the U-clip over the hook on each of the hinges to lock them. This will prevent the hinge from snapping closed when the door is removed. 6. Grasp the oven door by the sides near the top, and carefully close it until the hook in the hinge contacts the hinge support (approximately 3/4 of the way). You will feel some spring resistance while you do this, which is normal. 7. Gently lean against the top of the door to hold it in position, and grasp the door firmly by the sides approximately 2/3 of the way down, then open the door slightly, and lift it until the hinges are free of the frame supports. Pull the hinges out of the oven slots and remove the door. REINSTALLING THE OVEN DOOR 1. Hold the oven door by the sides approximately 2/3 of the way down and insert the hinges into the oven slots near the top as far as possible.2. Lower the oven door to its fully open position. 3. Rotate the U-clips on the hinges forward to the unlocked position. 4. Close the oven door. 5. Reinstall the two hinge locking screws. 6. Reinstall the hinge pocket covers."