Edward for Model Number SHE55M16UC/64 I put on new panel and now I get a 1 under on off and quick cycle light is on and cannot select other cycles. I also cannot figure out best way to remove new panel...
Answer Hello Edward, thank you for contacting AppliancePartsPros.comThat indicates that the dishwasher thinks it is stuck in a previous cycle for some reason or has a stuck key.Try a soft reset 1st by opening the door and pressing the cancel/reset buttons for about 3 seconds, close the door and wait about 1 minute, turn the unit back on and see if the issue has cleared. If that doesn't work try doing a hard reset by unplugging the dishwasher or turning off the breaker for 5 minutes. If that doesn't work then you've most likely got a stuck key under the control panel or one of the switch assemblies is messed up.To remove that fascia panel you will need to remove the 4 top inner door screws, sometimes this is easier to do after removing the outer panel which is held on by the 6 inner door screws, 3 along either side of the inner door. Read More... Answered by AppliancePartsPros.com | Wednesday, May 21, 2025