Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Electronic Pc Board by Bosch

4.89 (64)
By: Bosch
Part Number: OEM13302648
Manufacturer Part Number: 00676192

This electronic PC board is the appliance's main control, processing inputs and directing power to components so cycles run correctly. Replacing a failed board can restore normal operation when the unit is dead, won't start, or stops mid-cycle.

  • Interprets user inputs and sensor feedback to execute programmed cycles
  • Switches relays to power motors, valves, heaters, and other loads as required
  • Manages timing, temperature, and safety logic for consistent performance
  • Typical failure symptoms: no power/won't start, unresponsive or erratic controls, cycles ending prematurely, recurring error codes
What's included: 1 electronic PC board Installation notes:
  • Disconnect power before servicing; verify power is off with a meter
  • Use ESD protection; handle the board by the edges to avoid static damage
  • Move connectors one at a time to identical positions on the new board to prevent miswiring
  • Some models require service-mode setup or calibration after installation—follow your model's service documentation

More
$837.70

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Questions & Answers

For Bosch Electronic Pc Board (Part Number: OEM13302648)

View all Questions

Wayne N. for Model Number PDR364GL

Thermador Model PDR364GL Changing out an old EAC board with a new EGO board Board Part Number: 00676192 (Bosch) The new board tab connection mapping sheet conflicts with the current tab locations on two relays. Below explains what the current mapping is and what the mapping should be on the new board The wire colors for the current board do not always match the colors on the new board so I am using the colors that I have on my stove and the numbers stamped on the wire. I think if we refer to the numbers instead of the colors it will not cause confusion. Current EAC board K1 DLB1 Input DLB1 (my stove it is a red wire) Output L2 A (my stove it is a blue wire) Goes to baking and convection elements New EGO board K1 DLB1 Input L2 A (my stove it is a blue wire) Output K4 NO (my stove it is a brown wire) Current EAC board K2 DLB2 Input L2 B (my stove it is a red wire) Output K4 NO (my stove it is a brown wire) Goes to broiler New EGO board K2 DLB2 Input L2 B (my stove it is a red wire) Output DLB1 (my stove it is a red wire) For the broiler everything matches Input L1C (black wire) Comes from power box Output DLB2 (brown wire) Goes to broiler element The new configuration will be wires that are currently in input will now be in output. Is that correct?

Answer

Hello Wayne,
If the color of the wires do not match, you need to call the manufacturer and make sure you have the correct board and the correct instruction sheet for the model and serial number you have in your home. They have had some issues with this and if it is not the correct replacement part you can damage your unit by cutting on the harness to accommodate the incorrect board.

Read More...

Answered by AppliancePartsPros.com   |   Tuesday, June 3, 2014

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro

Share your thoughts with other customers

Answer or comment
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google