Dyilady73 for Model Number SHU9955UC/U12 The black pastic on/off button seems to have broken as it does not connect with the on/off switch behind it. Can the black plastic piece be replaced and are there instructions how?
Answer Hello DYIlady73. Yes the button Part# 00184588 can be replaced easily. Here are the instructions from the manufacture for the module. This will get you access to replace the On & Off switch 00175338. Hope this helps. 1.Remove fascia panel by removing six (6)T-20 Torx inner door screws.2.Disconnect wire harnesses from module after noting connector locations. 3.Remove fascia panel from console by removing four (4) T-20 Torx screws.4.Remove two (2) T-20 Torx screws holding module to console.5.Carefully pry back locking tabs on each front corner of module, then remove module from console. Remove button pad from module. Read more: http://www.appliancepartspros.com/bosch-switch-on-off-175338-ap2821521.html#ixzz2uRcH5Kt4'>http://www.appliancepartspros.com/bosch-switch-on-off-175338-ap2821521.html#ixzz2uRcH5Kt4 http://www.appliancepartspros.com Read More... Answered by AppliancePartsPros.com | Wednesday, February 26, 2014