Larry Cassada for Model Number Fed367dba Oven cycles ok but temperature is not correct to control setting. Example when I set temp to 350 degrees it only gets to 325. Set at 450 it’s stops at 410. I’ve replaced the temperature sensor and it made no difference. Thanks in advance Larry
Answer Larry, Before you replace the control, you may want to get an average oven temperature first. Preheat the oven 15 minutes, Allow the oven temperature to cycle three(3) times after the pre heat, If the average temperature is within 25 dgrs. +/- of the set temp. than the sensor and control are OK and can be calibrated to achieve a more accurate temperature. If the average temperature is +/- 30 dgrs. of the set temperature, then the ERC/Clock will need to be replaced. Read More... Answered by AppliancePartsPros.com | Monday, December 17, 2018