John B. for Model Number FGB24S5DCA When I press bake and set the oven temperature the oven will not light and gives a F3 code. What part needs replacing?
Answer Hello John, The F3 code indicates a failed oven temperature probe 316217002. This can be tested with an ohm meter for 1090 ohms at 77 degrees and will add 2 ohms for every 1 degree of temperature increase. This can be tested at the probe connections first, then at the control board. Comparing the two readings will indicate if a problem exists in the harness. If the test is good and the probe does not go open when tapped on, replace the control 318185431. Otherwise, replace the probe 316217002. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Saturday, February 25, 2017