Customer Questions and Answers for Range Lp Conversion Kit by Ge

Hello Shanda, As per the tech sheet: Convert the appliance pressure regulator. a. Use an adjustable wrench to unscrew the hex-nut cap from the pressure regulator. b. Apply pressure and turn counter clockwise to disassembly the plastic cap. c. Turn the cap over and hook it into the slots. The type of gas to be used should now be visible in the top of the cap. d. Screw back the hex-nut cap into the pressure regulator. Install the LP Orifice Spuds for the Top Burners: Four spuds are supplied with the range and are mounted in a bracket next to the regulator, (If they were returned to the proper position by the previous installer). Convert the Oven Burner Orifice to natural gas: Using a 1/2 open end wrench, turn the orifice clockwise until the orifice tightens "snug". Do not overtighten as damage to the orifice pin, below the orifice hood may result. (Note the natural gas orifices are brass and the LP orifices are silver). Light the Oven Burner and Adjust the Air Shutter as Needed. Adjust the Low Flame Setting on models with 270 degree rotation valves. If the original orifices cannot be located, I'm sorry but you will have to contact the manufacturer for the orifice sizes since they are not provided on any literature published on this model.