Customer Questions and Answers for Module Control Asm by Ge

Hi Glen. You need to remove power. Then remove the toe kick panel. Then remove the elect. junction box and use a volt meter to check for 120vac at the supply wire from the breaker. Insure there are tight wire connections and nothing open or shorted. Then the power goes to the door switches. The door micro switches are part # WD21X10169. You will need 2-of them. If when you shut the door you have 120vac supplied to the control module you will need to inspect the module for damage (if you can see any ) this part # is WD21X10215. Good luck. Thank you.