Jay Cee for Model Number JVM1750SMSS01 Microwave will not power up... As per the troubleshooting flow chart states to check all TCO's I found 0802-KSD-100LC-0 open or blown. I was able to jumper out (short) the wires together and the Microwave works. I just want to make sure the following part; TCO KSD-100LC is the one I should replace. More Information The connector I remove it from has a Black and Blue wire/connector (W-4/B-3) and the other side has a Black wire/connector (B-4). I believe its the Cavity T.C.O., what part number should I use to order? Thank you
Answer Jay Cee, Your description of the work performed bypassing the open TCO) would indicate the 0802-KSD-100LC-0 is the culprit.. The part number needed should be WB27X10195 / WB27X10195. Here's some more help " The cavity thermal cutout is located on the top side of the oven cavity beside the exhaust duct. The cutout has a temperature rating of 212°F. The cavity TCO is not resettable.To remove the oven thermal cutout: Remove the outer cover. Remove the duct assembly. Disconnect wiring to the oven thermal cutout. Slide the oven thermal cutout to the left to remove it from the spring clip attaching it to the oven cavity." Read More... Answered by AppliancePartsPros.com | Thursday, December 17, 2015