Ray Hello, I have a ge stove and while I cant find the exact model number, the part number on the ignitor is bk50044.52 and it has the 4 wire per ignitor knob harness. About 4 hours after some liquid was spilled, all 4 ignitors were trying to ignite without turning knobs, the spark seemed strong. If I actually turned the knobs they work. I took the harness out and disassembled, cleaned all liquids and contact points. Put back together, same thing. I'm thinking the only thing common between all 4 ignitor tips is the module. As soon as it's plugged into the wall, it's trying to light all 4 ignitors. A previous poster had the same issue and you recommended the harness with switches. I do not doubt your recommendation at all, I am just curious why the harness and not the ignitor module? Thank you
Answer Ray, the spark module receives a signal from the spark switches on the gas valves, they are regular switches that when closed, complete a circuit to the spark module and send high voltage to the igniters. At least one of the switches is reading closed. Without a model number I cannot give you anymore information other than there are two wires in the switch harness, disconnect them both, check for continuity through the two wires, if there is continuity, at least one switch is closed. Read More... Answered by AppliancePartsPros.com | Tuesday, March 5, 2019