Thomas E. for Model Number ZISS480DRDSS Water spontaneously comes out the dispenser. Can be stopped by using child lock or disconnecting molex connector above freezer door. Every once in awhile no water will come out (i.e. opposite problem). I suspect the switch but I can't get the dispenser trim off. My trim sits behind the stainless steel door skin. It doesn't physically seem possible to remove without removing the door skin. That would be a major operation. I need some ideas on how the trim can be removed to get at the switch. Thanks.
Answer Hello Thomas. 1. Remove the bezel from the outside of the freezer door. Note: On stainless steel models, the front panel must be removed. Remove screws from top, bottom, and hinge side. Pull out on hinge side. 2. Remove the screw from the bottom of the control panel. Lift up and pull the bottom of the panel out. Disconnect the connectors, and remove the control panel. 3. Remove 4 screws and the backing panel. 4. From the back side of the panel, remove the water switch and the light socket. 5. Remove 3 screws and the duct door solenoid. Read More... Answered by AppliancePartsPros.com | Tuesday, June 5, 2012