Brian for Model Number GDL22KCWASS After replacing the fridge temperature sensor (verified as working first), I am still getting an abnormal reading at the J1 plug (7.5k ohms at 36F....when plugged into the control board. I verified that once I unplug from J1, the sensor readings are reading as expected. Does this indicate a bad control board? Is there any way to test the board itself (i.e. am I supposed to get certain readings from the J1 pins themselves)? Thanks.
Answer Brian. You should check the thermistors unplugged from the board so as not to get false readings by reading through the board as well. The board is reading those resistances and should be controlling the temp based on those readings. if the thermistors check good then it does sound like you have a board issue. Read More... Answered by AppliancePartsPros.com | Monday, August 26, 2019