Michael for Model Number PSF26PGWA WW The fridge does not cool below 48 degreen, I have it set to 37 degree, The freezer does not go below 1 degree. I replaced the board no change. I opened the fridge up , there are two sensors one on the left side wall and one on the evaporator coil inserted inside a piece of c shape metal. Thinking one of those sensors are bad?
Answer Hello Michael. The freezer is good, however, you need to check and see if there is frost build up on the back freezer wall. If so, It sounds like you may have a defrost problem with the unit. Check and see if there is any frost build up on the back wall of the freezer. If so, you will need to test the defrost heater and the defrost thermostat. They should read closed for continuity when cold. You can test this with a multi-meter TJMA-DMT3. I will include a link at the end to assist you how to use the multi-meter if needed. If both parts are good, you will need to replace the defrost timer. Once the problem is repaired, you will need to thaw out the ice on the coils before the unit will operate properly. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Friday, June 29, 2012