Marvin for Model Number WSM2700WCWWW First the outer tank leaked and was repaired. Then we brought the washer back inside. The washer was working properly even while the tube was leaking. But as soon as brought it back in, hooked up the hoses, the dryer trunk and plugged it in, it would fill but the washer would not agitate.The timer works, the fill switch works, into rinse and spin and drain. All that works but the agitator and the auto spin shut off of the door. The agitator is completely dead in all settings.
Answer Hi Marvin. Usually if the washer fills and does not agitate it is a lid switch part # WH12X10216. Try to jump the red/blu with the orange wire to see if the agitation starts. Then if this does not work, try to jump the red/blu and the white together at the pressure sw. and see if it runs in agitation. Remove the agitator to see if the trunnion plate part WH01X10437 is broke off the side of the trunnion part # WH17X95 the bolts are part # WH2X1107. Thank You. Read More... Answered by AppliancePartsPros.com | Friday, January 27, 2012