David for Model Number WBSR3140GOWW No, the temperature of the water does not matter at all. The same thing happens whether it's on cold or hot water for the first cycle. Thanks for your first answer. Any other ideas? Here's my original question: My washing machine stops mid cycle. It will do the first washing, completely drain, but then freezes and won't fill up again to do the rinse. If I advance the timer, it goes through the rest of the cycle (timer just makes noise for a while, then spins the tub to get the water out, even though it has no water in it). I've tried all the different cycles, and they all do the first washing, but as soon as it drains and tries to do the rinse, the timer stops. I think it may be the water level switch, but I'm not sure. Any ideas? Thanks for your help!
Answer Hello David. Test and see if there is power going to the valve at the rinse cycle. If so, and water does not come in,, replace the water valve WH13X10027. If there is no power there, check and see is the timer is sending out power for the valve on the same wire colors. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Tuesday, August 2, 2011