Thierry for Model Number WT5680HVA We noticed a leak under our washing machine. This always happens after three or four loads. The water spills out and runs over the top of the tub and into the breakdown where the EBD50360202 overflow sensor is located. I can't figure out why the water is spilling in this area after three or four loads. Also, the display panel does not show any water leak code. We know there was a slight leak only by looking under the machine. We think the sensor is bad. We tested the continuity of the sensor with a contact on both electrodes and it is good, but not good when submerged in water. Can you help us with the sensor ? Any ideas why the water spills over the tub ? No problem with water level in the tub.
Answer Thierry, for water to spill out of the top of the tub one of a few things would be occurring. The water level is too high which can be caused by a partially blocked or blocked pressure hose, there are excessive suds that would be coming up during agitation or spin, or there could be a crack in the tub. These things would need to be inspected for. Read More... Answered by AppliancePartsPros.com | Monday, February 7, 2022