Joe for Model Number WM0532HW Was getting intermittent LE error. 1 every 2-3 months. power off for 30 minutes, spin the drum clockwise, then counter clockwise would fix it. now was 3 times in 1 week. ordered, and installed hall sensor. still getting error. Drum spins by hand with no resistance. Stater and rotor looked good when hall sensor changed. Are there some tests that I can do to narrow down defective component ? washer is 10 years old. Thanks.
Answer Joe, The LE is a locked rotor error in which you will want to do the following. • The connector (3-pin, male, white) in the MOTORHARNESS is not connected to the connector(3-pin, female, white) of STATOR ASSEMBLY.• The electric contact between the connectors(3-pin, male, white) in the MOTOR HARNESSand 4-pin, female, white connector in the MAIN PWBASSEMBLYis bad or unstable.• The MOTOR HARNESS between the STATORASSEMBLY and MAIN PWB ASSEMBLY is cut (opencircuited).• The hall sensor is out of order/defective Read More... Answered by AppliancePartsPros.com | Thursday, June 5, 2014