Hndrcks for Model Number RF4267HAWP/XAA-0000 About 6 weeks ago the icemaker started to slow down ice production - now, it only produces ice when the reset button is pressed. After replacing the icemaker (problem didn't go away) I then determined that the freezer is not getting cold enough, it only gets down to about 25 F. Fridge temp is good, no ice or frost buildup anywhere, cleaned coils and made sure compressor fan is running. Compressor gets warm but not super-hot. I have run the front panel diagnostic and there are no errors. One thing I have noted is that the actual freezer temperature (that flashes after changing the desired temperature) works between 0 and about -6 C and then flatlines to -22C and stays there. I got a replacement PCB but that hasn't changed the problem. I am now thinking it must be either the temperature sensor in the freezer or possibly the PCB Inverter is borderline. I ran the forced compressor test and the inverter LED is a solid steady red. Do you have any suggestions?
Answer Hello Hndrcks. Yes, based on the information you provided, it sounds like the temp sensor in the freezer may be bad. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Wednesday, September 3, 2014