Mike for Model Number WA52J8700AP/A2-00 How can I test this board to make sure that it is the board and not something else causing the dryer not to come on?
Answer Mike, the touch sensor assembly DC93-00376A is going to be separate from the on/off button and would be a very unlikely cause of failure. The user interface control DC92-01311H and the main control DC92-01021V would need to be tested. At the main control connection CN6, there should be 5VDC from pin 6 to pin 7, and 12VDC from pin 7 to pin 8. If the voltage is present, there should be a signal voltage from pin 7 to pin 9 when the on button is pressed. If the 5VDC or 12VDC is not present, or if all three voltages are present, the main control has failed. If the 5VDC and 12VDC is present but the on-signal voltage is not, the user interface is the likely cause of failure. Read More... Answered by AppliancePartsPros.com | Thursday, July 13, 2023