Mike July 10, 2023 for Model Number WA52J8700AP/A2-00 How can I test this board to make sure that it is the board and not something else causing the dryer not to come on?
1 Answer Mike, the touch sensor assembly DC93-00376A is going to be separate from the on/off button and would be a very unlikely cause of failure. The user interface control DC92-01311H and the main control DC92-01021V would need to be tested. At the main control connection CN6, there should be 5VDC from pin 6 to pin 7, and 12VDC from pin 7 to pin 8. If the voltage is present, there should be a signal voltage from pin 7 to pin 9 when the on button is pressed. If the 5VDC or 12VDC is not present, or if all three voltages are present, the main control has failed. If the 5VDC and 12VDC is present but the on-signal voltage is not, the user interface is the likely cause of failure. Read More...
Mike July 10, 2023 for Model Number WA56H9000AP/A2-00 Does this board come with double sided tape to hold it in place like the old one?
Mike July 10, 2023 for Model Number DV50F9A6EVW/A2-00 Will replacing this board get the buttons on my dryer?
1 Answer Mike,They are not actually buttons but sensors to detect when you are touching them. Read More...
Ken March 03, 2022 for Model Number WA52J8700AP/A2 Do you happen to have instruction on replacing the Samsung Assy Sensor;touch Sensor (Part Number: AP5799848)?
1 Answer Ken, Unfortunately, there are no written instructions available for this but it would just be a matter of removing the screws holding the control panel ain place and removing the control panel to access the sensor. Read More...
John November 25, 2016 What is the procedure for replacing the ap5799848 user interface on my Samsung dryer?
1 Answer Hello John. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...