Matt for Model Number FTQ353IWUX/XAA-0000 Everything works on the Range all the burners the light the clock the convection motor but when I turn the oven on it will heat up for about 4 to 5 minutes and then start beeping and I get a error code E08. I have a multimeter and I checked the elements I checked the thermometer probe and out put volts is 240. What is your best estimated guess to be the problem.
Answer Matt, The E08 error is a oven heating error. Here is what you will want to check. 1. Disconnect power. Open the back cover. Disconnect sensor harness from control. Measure sensor resistance :1080O at the room temperature ? If there are any problems, replace oven sensor. 2. Check the broil, bake and convection heater. Check the resistance of the each heater. 3. Check whether DLB of sub PCB, Broil, Bake and Convection heater relay are being worked normally. 4. Check whether there is any disconnection of harness which is linked with main PCB on main PCB. 5. Check the resistance of oven sensor connector on main PCB. (Normal : 2850O) Read More... Answered by AppliancePartsPros.com | Thursday, May 25, 2017