Donna for Model Number MVWX700XL0 As soon as I start a load and the drum spins while sensing the load it quickly stops and lid lock flashes. Tried to run diagnostics and it will run thru until time to spin and same thing happens stops and lid lock blinks. I put it on drain and spin it worked all the way thru, tried rinse and spin and no luck , went and tried drain and spin again and it didnt work the second time. I had stored codes of F7 E1, F0 E0. Please help only 1 yr old
Answer Donna, The F0 E0 just indicates no more errors. The F7 E1 is a basket speed sensor failure. This fault is displayed when control cannot determine the speed of the basket or it changes too rapidly. You will want to check for a locked rotor or check to make sure that the basket, impeller and motor can rotate freely. Check all the harness connections from main control to motor and shifter. If this checks ok then on the tech sheet do test number 3A on page 13 for the drive system. Most likely this will end up being a shifter issue. The part number for the shifter will be WPW10006355. Read More... Answered by AppliancePartsPros.com | Tuesday, September 1, 2015