Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Washer Shift Actuator by Whirlpool

4.89 (64)
By: Whirlpool
Part Number: OEM18044142
Manufacturer Part Number: WPW10006355

Fix a washer that won't spin, agitate, or shows F7-E1/F7-E7 errors with a new shift actuator. Controls cycle transitions. Easy DIY repair with video guide.

More
$54.25

IN STOCK
Ships Monday Guaranteed
Add to Cart

Questions & Answers

For Whirlpool Washer Shift Actuator (Part Number: OEM18044142)

View all Questions

Answer

Hello Jesse,
You will need to verify nothing is between the tubs and check the shift actuator W11212745 operation. The splutch assembly W10721967 should be checked as should the motor capacitor W11395618 connections and motor windings. A diagnostic test mode can be performed to pull the fault codes. ACTIVATING THE SERVICE DIAGNOSTIC TEST MODES
1. Be sure the washer is in standby mode (plugged in with all indicators off, or all indicators lit but not flashing). NOTE: There are 5 failure modes that can cause the washer to go out of service, indicated by all of the LEDs lit, but not flashing. When this occurs, the washer cannot be started until the condition that caused the failure is corrected and the fault code is cleared. Use the following steps to enter into Fault Code Display Mode, view the fault code, and clear logged fault codes.
2. Perform the following sequence of movement using the cycle selector knob. NOTE: AFTER RESET, sequence “a” through “e” must be completed within 6 seconds, stopping just briefly between each click, resulting in the following sequence: Left - Right - Right - Left - Right. RESET - Place cycle selector knob pointer at 12 o’clock position and wait 3–4 seconds before proceeding.
a. Rotate cycle selector knob counterclockwise one click.
b. Rotate cycle selector knob clockwise one click.
c. Rotate cycle selector knob clockwise one click.
d. Rotate cycle selector knob counterclockwise one click.
e. Rotate cycle selector knob clockwise one click.
? Successful activation of Diagnostic Test Modes will be indicated by all status LEDs (except for Lid Locked) flashing ON and OFF in half-second intervals. NOTE: LED names may vary between makes and models.
? If the status LEDs do not display as described above, the sequence may not have been completed within 6 seconds. Repeat step 2 to ensure this was not the cause.
3. There are several accessible Diagnostic Test Modes. To select the desired Mode of Operation, toggle the cycle selector knob left and right one click in each direction, advancing through the Test Modes until the status LEDs match the mode desired to enter.
4. Press the START button to enter desired mode of operation.
Unsuccessful Entry
If entry into diagnostic test mode is unsuccessful, refer to the following indication and action:
Indication: None of the LEDs turn on.
Action: Press START button to enter setting mode.
? If indicators come on, repeat steps 1 through 4 of Activating the Service Diagnostic Modes. NOTE: Rotating the dial too fast or too slow will affect entry.

Read More...

Answered by AppliancePartsPros.com   |   Saturday, March 18, 2017

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro

Share your thoughts with other customers

Answer or comment
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google