Jeff for Model Number MVWC425BW0 Washer cycle is taking >1 hour. Gets through rinse but take long time to move into spin. I replaced the actuator twice, splutch one, and belt once. Calibrate and tests fine. Initial 2-10 loads it is fine then goes back to >1 hour cycle time. Appears the gears on the splutch are not aligned so the actuator can not move full stroke to engage them. If I remove the actuator - I'm unable move the cam lever to engage the splutch. If I rotate the pulley slightly, I can manually and freely engage splutch. Reassemble and works fine are a few cycles and them back to issue.
Answer Jeff, Check to see if there are any stored error codes and check to make sure that there is nothing that is caught between the tubs of the unit which would cause this issue. Read More... Answered by AppliancePartsPros.com | Thursday, November 29, 2018