Joe P for Model Number KUD03FTSS 03 Problem began with several control panel lights dimly illuminated and timer LED showing what looked like a dimly lit eleven (11). However, it looked like only half of each "1" was lit. The dishwasher would not run except it would empty itself when the Cancel button was pushed. The lights for the various cycles would not turn on when pushed. Opened the unit and wiped the ribbon cable at the interconnect clean, jumped the switch and tried turning on the unit. The lights would come on for the cycles but only the "Normal" cycle seemed to actually start. Reassembled everything and ran the "normal" cycle. It seemed to take longer than usual and I opened the door to check the dishes. It was running okay. However, when I closed the door it would not continue. Cancelled the cycle. Now the four cycles lights come on when pushed like it is going to run properly (However, the Heated Dry light won't go off when pushed), but the "Start" button doesn't illuminate or get things going. Does this sound like a control panel, control board, interconnect or some other issue? Thank you
Answer Joe, Based on the information it appears that the control board will be the cause of the unit not operating properly. Read More... Answered by AppliancePartsPros.com | Monday, August 31, 2015