Customer Questions and Answers for Board, L.V. Ice2o by Whirlpool

Hello Bill. The L.V. Board 67006294 does not need to be programed. You will need to program the unit if you replace the H.V. Board on the unit. The codes you described means the code didn't take. You may need to reprogram the H.V. Board on the unit. Hope this helps. 1. Press and hold the Door Alarm Keypad DoorAlarm . 2. Press and hold Freezer Temperature Down Keypad . 3. Release the Door Alarm Keypad DoorAlarm and wait 3 seconds. 4. The control will display PE to indicate the programming mode. 5. Entry is confirmed by pressing the Freezer Temperature Down Keypad once more. 6. The control will display the current Program CODE. This value should be validated with the Program CODE printed on the unit serial plate. NOTE: If the Program CODE is correct, the Programming Mode is exited by pressing Door Alarm Keypad for 3 seconds. 7. Press the Refrigerator Temperature UP Keypad or Refrigerator Down Keypad to change the digit value with each key press. 8. The decimal point indicates the selected digit. Press the Freezer Temperature UP Keypad to select the next digit. 9. Once the desired Program CODE is entered, press and hold the Freezer Temperature DOWN Keypad until the Program CODE begins flashing indicating it has been saved.