Karen for Model Number WM27260B Hi. After Thanksgiving, I used the self-cleaning mode to clean my WM27260B Jenn-Aire oven. After cleaning, the bottom bake element shorted (screws out and moved). Replaced bake element and terminal ends. Broil element continues to work. Bake element did not work, so I removed oven from the wall and found a burn mark on sensor (violet) wire. Spliced wire and upon checking oven while out of wall, the bake element worked (burned my finger touching the element). Since unit was out, I vacuumed dust, etc from back of oven. Replaced oven into wall and bake element does not work! Repeated removal and can hear clicking at relay board and sparks sometimes. Think it is one of the relay boards or control boards but don't know where to go from here. Your help is greatly appreciated.
Answer Karen, You will want to check the wiring between the board and the element to make sure that there are no loose wires. If the wiring checks ok then the relay board will most likely be the issue. the relay board is part number 12001690A but unfortunately it has been discontinued by the manufacturer with no suitable replacement available. Read More... Answered by AppliancePartsPros.com | Tuesday, December 22, 2015