Customer Questions and Answers for Electronic Control by Whirlpool

Hi Scott. F 01 code=A communication error between the Central Control Unit (CCU) and the EEPROM on board the CCU occurred.Possible Causes/Procedure A power glitch may cause this error.– Unplug washer or disconnect power for two minutes. Verify CCU operation by running a Diagnostic Test or any cycle. PUMP DRIVE ERROR=Replace CCU board.MAIN RELAYS ERROR=Possible Causes/Procedure/ The relay might be soldered or always open.– Replace CCU board. F 22=After 6 failed attempts to lock the door. Possible Causes/Procedure Door lock mechanism is broken or removed from door. Door switch/lock unit failure. 1. Unplug washer or disconnect power. 2. Check door switch/lock unit. 3. Check the wire harness connections to the door switch/lock unit and Central Control Unit (CCU). The door latch part # is WPW10253483. The main control board is WP8182634. Re verify your model # and order parts w/ our A.P.P. Customer Service @ 1-877-477-7278. Thank You.