Customer Questions and Answers for Refrigerator Ice Maker Assembly by Whirlpool

Jeff, You will want to check to see if the light on the right side wall is flashing when you open the door. If so then push in on the flapper of the left wall and see if it glows solid. If it continues to flash then you will need a new emitter board W11629974 and if it glows solid then it is good. If this checks ok then you will want to pull the icemaker out and check the module. On the large gear in the middle look for the pins in the center to be pushed together or one of the pins missing then the module would need to be replaced. Also pull the icemaker module off and see if there is a burn mark on any of the terminals of the module. If so then the module will need to be replaced. Check the fill tube to make sure that it is not frozen. If frozen then you will need to clear the ice.