Pete for Model Number KUDSO1IJBSO All buttons work but Start. I can press till finger falls off! Will not start. I want to make sure replacing Control Pnl will work? I have unpluged to reset, drain button worked and drained the mech, all lights and buttons work.
Answer Hello Pete. You can test the ribbon cable on the control panel. When you press the start button, P1-4 and P1-12 should close for continuity. If they read open, you have a bad control panel WP8270232. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Tuesday, August 9, 2011