Karl for Model Number KUDS01IJBS0 Question regarding the ribbon cable from the front button panel to the control board. Do you have the complete pin out? Our dishwasher would not start so I went through the checklist to narrow it down to the button panel. I ended up soldering in a pair of wires to the ribbon cable pins 4 and 12 and ran them out to a button - talk about ghetto, but it got us washing dishes again! However, I may have broken the ribbon cable as the hi-temp scrub option does not light up anymore. Thanks for hosting this great forum. It has saved me hundreds of dollars over the past couple of years and I always order my parts from here. Now, need to debate ordering a new panel versus a new dishwasher - this one is almost 10 years old... Karl
Answer Karl, The pin location and matrix are a bit difficult to decypher, but your technical date sheet does have the breakdown and test points. Your tech sheet is usually attached to the backside of the lower kickplate or frame of the dishwasher. But you've already diagnosed the issue, you have a problem in the keypad and will need WP8270232 control panel/keypad assembly. Thanks and Good Luck Read More... Answered by AppliancePartsPros.com | Tuesday, January 3, 2012