Tom for Model Number gmc305pdq6 Hi, I got this board and it came with a oven size reprogramming procedure. Well in the process of the program the power went off to the house. I reprogramed the hole system after the power came on and now the clock comes up and has a start? next to it, then the clock goes blank---but everything still works---no clock? Please let me know what to do.
Answer Tom, Here's some info that should help you out "The START/ENTER pad begins any oven function except the Timer. If not pressed within 5 seconds after pressing a function pad, the “START?” indicator light will flash as a reminder. On some models, “START?” will appear on the display. If not pressed within 4 to 5 minutes (depending on your model) after pressing a function pad, the oven display will return to thetime of day mode and the programmed function will be cancelled." You need to press the start button after you progrsam in the time. " This is a 12 hour clock and does not show a.m. or p.m. To Set:Before setting, make sure the oven, Timer and Timed Cooking are off.1. Press CLOCK. 2. Press the HR or MIN “up” or “down” arrow pads to set the time of day. 3. Press CLOCK or START/ENTER.To Disable:The clock time can be disabled so that it does not show on the display. To disable, press and hold CLOCK for 5 seconds. Todisplay the clock time again, press and hold CLOCK for 5 seconds and the time of day will show on the display. The clock time should not have to be reset." Good Luck and Thanks Read More... Answered by AppliancePartsPros.com | Wednesday, January 18, 2012