Gary for Model Number 11085081400 The dryer was functioning normally until yesterday and the panel LED's were very dim and nothing would function other than the drum light. I checked the input power and found 138 ohms from L1 to ground. Followed this to the control board with everything disconnected and measured the 138 ohms from P1-5 to P1-2 neutral on the board. Does this indicate replacement of the board? I have not found any other malfunctions in the auxilaries.
Answer Hello Gary. You need to test power, not ohms. If there is 120 volts to the board and the board does not work, you will replace the board on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Friday, October 18, 2013