Bob Robinowitz for Model Number AP4098059 Some of the numbers are not working on my control panel for my Jenn Air Model JDS9860AAB. Its very hard to bake a potatoe when the numbers 3 and 4 don't work! Following research of your repair forum, I ordered part number AP4098059.I found very detailed installation instructions on your repair forum for the similar part AP4094903. I assume these instructions will work on my part as well. Am I correct? Thank you very much for providing this service. The appliance repair service wanted $800 to fix this (parts and labor).
Answer Bob, Here are instructions for your specific model number "Control Panel 1. Remove power from unit. 2. Remove burner switch control knobs. 3. Open oven door and remove screws securing control panel. 4. Remove screws located on the right and left sides of the control panel. 5. Grasp control panel on the far left and right sides and gently pull the control panel out and down. NOTE: Gently pull control panel out and down. 6. Remove infinite switch control knobs, infinite switches, indicator lights, rocker switches, and electronic control/clock (as necessary) and transfer to the new control panel. 7. Reverse procedure to reinstall control panel. Electronic Control 1. Remove control panel, see “Control Panel” procedure, 2. Remove screws securing electronic control bracket to control panel. 3. Label and disconnect terminal wiring from electronic control. 4. Reverse procedure to reinstall electronic control." Good Luck and Thanks Read More... Answered by AppliancePartsPros.com | Monday, November 14, 2011