Answer Hello Harlan. If the water temperature sensor (NTC) value is out of range (23°F to 217°F [-5°C to 103°C]) during the water-heating step of the WASH cycle. Possible Causes/Procedure - Unplug washer or disconnect power. - Make sure that connections to water heater & CCU (TH2 & HE2 cavities) connectors are not broken or with wires detached, and that connector internal pins are visible. - Check continuity from the water heater sensor (black wires) to CCU (TH2 cavity) connector. - If the continuity diagnosis failed, the Main Harness must be replaced. - Check the resistance of heating element. - Check the resistance of the water sensor. - Plug in washer or reconnect power. - Verify the washer operation by running the Diagnostic Test cycle. - After the diagnostic test has finished, unplug washer or disconnect power and wait for 15 seconds. Read More... Answered by AppliancePartsPros.com | Monday, October 6, 2014