Ray for Model Number KUDS01FLSS6 KitchenAid Dishwaher - KUDS01FLSS6. The clean light blinks 7 times. Have already changed the heater element and the User Interface. I can put it in diagnostic mode and it starts to run through the cycles but then stops with the blinking light. Any suggestions? Thx
Answer Hello Ray. It sounds like the control board WP8564543 is bad and will need to be replaced. Make sure the thermostat in the heater circuit is reading closed for continuity. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Saturday, March 3, 2012