Steve C. for Model Number KUDI01TJBL0, The washer works fine except a 70min cycle continues on for three hours regardless of the cycle you select. This would seem the likely culprut but should I be looking elsewhere IE sensors? I have a volt/Ohm meter and can check if supplied with the spec. If I replace the board, what are the odds that I am replacing the defective part? Thanks
Answer Hello Steve. It sounds like you may have a heating issue with the unit. You will need to check and see if the unit is heating properly. If not, you will need to test the heater and the thermostat in the unit. They should read closed for continuity. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Tuesday, May 22, 2012