Customer Questions and Answers for Electronic Control Board by Whirlpool

Hi Shuja. Terminal P2-1 on the board connects to a Orange w/gry stripe wire. P2-2 terminal connects to a yellow w/ black stripe wire. The P2-3 wire is the brown wire to the fill valve. The P2-4 is the light blue wire to the dispenser. The P2-5 is open. The P2-6 is a blk wire w/wht stripe to the thermal cut out fuse. Then P-1 is either the digital display or the active user interface connection. The P-3 is a gray wire to the drain motor. The P-4 wire is open. The P-5 is blue wire to the motor. The P-6 is a White w/red or the blue w/red stripe going to the hi-limit thermostat. The P-7 is either a white w/violet or a blue w/violet wire going all the white neutral wire feeds. The P-8 is a tan wire to the door switch. The P-9 is a red w/blk to the motor. The P-10 is a blu w/ blk wire to the vent motor. The P-12 are 2 red wire's from the rinse aid dispenser. Thank You.