Dan for Model Number kudsq2frsso The dishwasher starts and runs normally. After 20 to 30 min. it shuts down completely. No motor, no lights, nothing. After 10 or so min. the lights come back on and the unit can be restarted and will continue in the cycle were it left off. The longer I wait to restart the longer it will run before it shuts down again. Seems like that lets it cool down a bit or something. After many restarts and 2 to 3 hours later it finishes the cycle. Any ideas?
Answer Dan, You're most likely going to need to replace the control board WPW10084141. It's most likely the temp sense circuit is faulty in the control board and shuts the dishwasher down, because it can't "see" the sensor. But, first thing you want to check, is the connections to the power supply wiring in the junction box on the front frame of the dishwasher, behind the kickplate. A loose connection there could cause the wiring to separate and loose voltage to the dishwasher. Read More... Answered by AppliancePartsPros.com | Thursday, February 21, 2013