Ann for Model Number MZF34X16DW01 i turned off to clean. tried to turn on, lights come on, LED lights blink and i set to temp and after about 30 secs, the LED lights start blinking and nothing happens. I have reset 3 times (unplugged for 2 or 3 hours and tried again)
Answer Ann, It would be advised to start by placing the machine into the diagnostic mode checking for error codes and doing component testing, The information for these test are located in the tech sheet packaged with your machine. {To Enter the Service Diagnostic Mode} 1. Set the freezer temperature to the lowest setting prior to entering the Service Diagnostic mode. LED1 should be the only LED illuminated. 2. Press and hold SW1 (Temp Setting) and the door switch simultaneously for 5 seconds. 3. Release both buttons after all of the LEDs are illuminated. Read More... Answered by AppliancePartsPros.com | Tuesday, April 4, 2023