Daniel for Model Number MDE9700AYW Won't start. I push the start button, the "Drying" cycle status light goes on. No tumble, no heat, no noise. Diagnostics shows error codes 10 and 11.
Answer Daniel, check the high limit thermostat, it has a yellow and white wire going to it, if it checks open for continuity, it will need to be replaced. Check the door switch as well. If the belt is broken, this model will not allow the motor to come on and run. If all these check ok, go to the main control board, press the start button, you should read 0 volts across the brown and black connections on the motor relay, if you read 120 volts, the relay is bad and the control would need to be replaced. Part number for the board is WP35001153, the thermal fuse is part number WP35001087, it is located on the blower housing. Read More... Answered by AppliancePartsPros.com | Wednesday, April 3, 2019