Pj for Model Number MDG3000AW Dryer will not start; burnt smell. was loud noisy for a while. Want guide to diagnose what could be wrong
Answer PJ, In order to send out information on this we would need to have an email address to send it to. Read More... Answered by AppliancePartsPros.com | Wednesday, February 15, 2017
Answer PL, the information would indicate you most likely have burnt out motor. You will need to disconnect power to the machine. Remove the front panel and door. Remove the front tumbler support.shroud assembly. Remove the belt and tumbler. Remove the screw in the front of the blower cover that holds the cover to the base of the machine. Remove remaining screws from the front blower housing and remove cover. Remove retaining clip and snap ring from motor shaft and remove blower wheel. Label or mark wires and disconnect wires from motor switch. Remove the motor support clips which retain the motor to the motor base. Use a nutdriver large enough to accept the hook end of the clip. With a downward push of the nutdriver onto the clip end, tilt the nutdriver handle toward the motor to unhook the clip from the support. Remove the motor. Reverse the procedure to install the replacement motor. Read More... Answered by AppliancePartsPros.com | Wednesday, February 15, 2017