Jack A for Model Number MEDE200XW0 My dryer works fine when you put it on manual time setting. When we use the automatic settings it will not shut off when time is up and resets to original time and continues to run. I'm thinking its a sensor. Parts list have both a Harness, Sensor and a Harness Moisture Sensor. Is this something that is easy to replace or do I need a pro.
Answer Jack, It does sound like the issue would be in the sensor. What you will want to do first is to try to clean the sensor bars with rubbing alcohol to get any fabric softner residue off of them. Once this is done then run a load and see if it continues to do the same thing. If so then you will want to check the harness to make sure that there is not an issue with the wiring. To check this you can pull the main top off and the lower access panel. Look up from the bottom to see if you can see any type of damage at the connection for the sensor bars or to the wiring and then check at the main board for the same. Read More... Answered by AppliancePartsPros.com | Wednesday, November 6, 2013