Ron W. for Model Number kgrt607hbl9 Oven burner will not burn for bake. What is the correct resistance for the ignitor? Is there anything else I should check? No error code posted.
Answer Hi. The correct resistance is between 85 and 95 ohms cold. The ignitor is part # WP9782065. You will need to have the power connected and the unit set to the bake mode. You will test at the gas valve and set your meter to read 3.2 to 3.6 VAC. If the correct voltage is there, you have a bad gas valve. If the voltage is low, the ignitor is bad and will need to be replaced. You can test this with a multi-meter TJMA-DMT3. The oven safety valve is part # WP9755424. Thank You. Read More... Answered by AppliancePartsPros.com | Thursday, October 18, 2012