Customer Questions and Answers for Hinge, Door by Whirlpool

Ron, Open the oven door as wide as possible. Insert a small 1/8" diameter pin(8 penny nails or 1/8" drill bits work pretty good)through the hole on the right and left door hinges to hold the hing open. Remove the two Phillips head screws holding the hinge retainer plates and hinge cover plate on the oven front frame, just above the hinge arm,left and right sides, and set aside. Raise the oven door up to the broil stop, the door liner will align and press against the 1/8" pins Grasp the door on both sides near the top, lift the door up and out to remove the door and hinge from the oven door receiver inside the front frame of the oven. ( the hinge assembly will remain in the door liner assembly.